Common Water Well Issues in Montgomery County: Solutions and Prevention
Private water well systems are a dependable source of clean water for many homeowners across Montgomery County, TX. However, like any mechanical system, they are vulnerable to wear, environmental impact, and neglect. From low water pressure to contaminated water, knowing how to identify and resolve common water well issues is key to maintaining consistent water flow and safety.
At 77 Water Well, we specialize in diagnosing and fixing all types of water well problems, offering expert well pump repair, inspections, and preventative maintenance to keep your system operating at its best.
Understanding Common Water Well Issues
Water well systems include several critical components—pumps, pressure tanks, electrical connections, and plumbing—all of which must work together. A fault in any part of the system can affect your water supply.
Here are the most common problems well owners face in Montgomery County:
1. Low or No Water Pressure
One of the most frequent complaints from homeowners is low water pressure or the complete loss of flow. This issue could be caused by:
- A failing pressure switch
- Sediment buildup in the pipes or filters
- Leaks in the pressure tank
- Pump failure or worn impellers
77 Water Well conducts complete system diagnostics to identify pressure issues and restore performance through targeted repairs or component replacements.
2. Pump Short Cycling or Constantly Running
If your well pump turns on and off too frequently or runs non-stop, it may be due to:
- A leaking pressure tank bladder
- Malfunctioning pressure switch
- Loss of water in the well (low yield or seasonal drop)
- Faulty check valves
These issues, if left unchecked, can shorten the life of your submersible or jet pump. Our technicians adjust or replace pressure tanks, fix valve problems, and recommend water conservation strategies to protect your aquifer.
3. Dirty or Cloudy Water
Discolored, sandy, or cloudy well water may signal:
- Sediment infiltration from the well casing
- Aquifer disturbance after flooding or drilling
- Corroded pipes
- Contaminants like iron, manganese, or bacteria
77 Water Well provides water testing and filtration system installation to ensure the safety of your water supply. We also offer shock chlorination and flush systems when necessary.
4. Air in the Water Lines
If your faucets sputter or spit air, it’s a sign of air entering the system. This could be caused by:
- A leak in the suction line
- Cracks in the well casing
- A drop in the water table
- Pump failure
Our team carefully inspects well casings and pipes, seals cracks, and checks pump settings to restore normal flow and pressure.
5. Electrical Failures in the Well System
The well pump depends on an uninterrupted electrical supply. Common electrical issues include:
- Tripped breakers
- Faulty wiring
- Burned-out pump motors
- Pressure switch arcing
77 Water Well offers full electrical diagnostics and rewiring to restore function safely. All repairs comply with Texas water well system codes and are carried out by licensed professionals.
Preventative Maintenance to Avoid Major Repairs
Proactive maintenance can significantly reduce the risk of system failure and costly repairs. Here are our top recommendations:
Annual Well Inspection
Schedule a comprehensive inspection to check:
- Pump performance and energy usage
- Pressure tank pressure levels
- Pipe integrity and leaks
- Electrical connections
- Water quality
77 Water Well offers annual service plans to keep your system efficient and compliant with local water safety standards.
Water Quality Testing
Test your well water at least once per year—or more frequently if you suspect contamination. We provide certified testing for:
Proper Location and Drainage
- Coliform and E. coli bacteria
- Nitrates
- Hard minerals
- pH levels
Ensure your well is located uphill from potential sources of contamination (septic systems, livestock areas) and has proper drainage to prevent surface water intrusion.
How 77 Water Well Helps Homeowners in Montgomery County
As a local expert in well pump repair and maintenance, 77 Water Well brings decades of experience servicing both residential and small commercial wells throughout Montgomery County. From emergency repairs to routine check-ups, we are the go-to team for trusted well care.
Services We Offer
- Water well pump repair and replacement
- Pressure tank servicing
- Electrical diagnostics and switch repair
- Water quality testing and treatment
- Preventative system maintenance
- Emergency water well service
Frequently Asked Questions (FAQs)
1. What causes low water pressure in a well system?
Common causes include clogged filters, pressure tank issues, or pump wear. 77 Water Well can diagnose and correct pressure problems efficiently.
2. How often should I have my water well inspected?
Once a year is recommended, or more frequently if you notice changes in water pressure or quality. Regular inspections can prevent costly failures.
3. Is cloudy water from my well dangerous?
Cloudy water can indicate sediment, rust, or bacterial contamination. 77 Water Well offers testing and filtration solutions to restore safe water.
4. Why does my well pump run constantly?
This may be caused by a leak, a faulty pressure switch, or a damaged pump. Our technicians can assess and fix the issue to prevent energy waste.
5. What should I do if my pump stops working completely?
First, check your circuit breaker. If that’s not the issue, contact 77 Water Well immediately. We offer fast, on-site diagnostics and pump replacement.
Dependable Water Starts with a Dependable Well – Trust 77 Water Well for Repairs and Maintenance in Montgomery County
Experiencing common water well issues in Montgomery County? Contact 77 Water Well today for expert diagnostics, pump repair, and preventative maintenance designed to keep your system running year-round.